How to clean the brass filter?

Addtime：2022-08-19 08:17:49 Resource：Zhejiang Zhongmao Pneumatic Co., Ltd.

The most commonly used filter cleaning method is backflushing.

That is, a set of air supply equipment (back blowing device) is applied to the high-pressure reverse airflow opposite to the filter element and its filtration direction, so that the dust and other attachments attached to the surface of the filter element are peeled off from the filter element; in addition, there are also in the prior art. The cleaning method of the filter element is to mechanically destroy the attachments on the filter element through the scraping mechanism that can move relative to the filter element, or to carry out high-pressure jet blowing of the attachments on the filter element through the nozzle directly facing the filter element.

1. Close the water inlet ball valve on the tee, open the water purification faucet to empty the remaining water in the machine; hold the main filter element and rotate it laterally (inward) about 90 degrees, and take out the filter element downward.

2. When the faucet water purifier is used for a period of time (usually 1-2 weeks), the water output will become smaller. When it is small enough to affect normal use, unscrew the filter element from the water purifier shell, and use sandpaper or Baijie. It can be cleaned with a cloth (no other cleaning agents are required). Scrub until a new surface is exposed.

3. Unpack the new filter element, take off the cover of the filter tip, align the machine head vertically and insert it upwards, turn it laterally (outward) about 90 degrees to fasten it, and gently shake the main core to ensure that it is in place to prevent water leakage.