What is the copper powder sintered filter element?

Addtime：2022-08-19 08:17:49 Resource：Zhejiang Zhongmao Pneumatic Co., Ltd.

Copper powder sintered filter element, copper powder sintered element is made of copper alloy powder sintered at high temperature, with high filtration precision, good air permeability, high mechanical strength, high material utilization rate, suitable for high working temperature and thermal shock. Widely used in pneumatic components, chemical industry, environmental protection and other fields. Porous elements of various shapes, structures, different particle sizes and porosity can be produced according to user requirements, such as: cover, cap, sheet, tube, rod-shaped filter element.

Basic information of copper powder sintered filter element

Copper powder sintered filter element and copper powder sintered filter element have good penetration filtration performance and high filtration accuracy, can better withstand thermal pressure and impact, high strength, good plasticity, anti-oxidation and corrosion resistance. Good assembly, can be welded, bonded and machined; strong regeneration ability, long service life; various porosity (28%-50%), pore size (4u-160U) and filtration accuracy (0.2um-100um) ), the channels are criss-crossed, can be used at a high temperature of 300, resistant to rapid cooling and rapid heating. Compared with filters made of paper, copper wire mesh and other fiber cloth, the performance is superior, and it is easy to assemble, disassemble and clean. It is mainly used to filter gas, liquid, and fuel oil. It is widely used in the above, and is also widely used in the filter elements of pneumatic and hydraulic circuits. The copper powder sintered filter cartridge can filter oil, water and impurities in the air, and can also reduce noise. In the compressed air self-rescue device, its air supply generally adopts the mine compressed air pipeline, which can decompress, muffle, adjust the flow, filter oil and water and other functions of the compressed air, so as to provide fresh air for the staff. The copper sintered filter element has the functions of air filtration and noise reduction, and is widely used in the air source processor of pneumatic components.

Technical characteristics of copper powder sintered filter element

1. The filtration precision is high, the pores are stable, and the phenomenon that the pore size changes with the pressure change does not occur. It can effectively remove suspended solids and particles, etc., with excellent filtration accuracy and good purification effect.

2. Good air permeability and low pressure loss. The filter element is completely composed of spherical powder

It has high porosity, uniform and smooth pore size, small initial resistance, easy backflushing, strong regeneration ability and long service life.

3. High mechanical strength, good rigidity, good plasticity, oxidation resistance, corrosion resistance, no need for external skeleton support protection, simple installation and use, convenient maintenance, good assembly, and can be welded, bonded and machined.

4. Pores are uniform, especially suitable for occasions with high requirements for uniformity such as fluid distribution and homogenization.

5. The copper powder sintered products are formed at one time without cutting, the effective utilization rate of raw materials is high, and materials are saved to the greatest extent, especially suitable for components with large batches and complex structures.

Application range of copper powder sintered filter element
Application scope of copper powder sintered filter element: suitable for filtering gas, liquid, fuel oil, widely used in petroleum, chemical industry, automobile, tractor, aircraft, shipbuilding industry, and also widely used in filter elements of pneumatic and hydraulic circuits